TALLINNA TEHNIKAÜLIKOOL
RAAMATUKOGU LOGO/REKLAAMIKOHT
TTÜ Raamatukogu uus ametlik veebileht asub aadressil http://www.ttu.ee/raamatukogu/
Vanal veebilehel enam infot ei uuendata

MEHAANIKATEADUSKOND 1998

Raamatud

  1. Mehaanikainseneride täiendõppe temaatika 1998/99. õppeaastaks. Tallinn, 1998. 38 lk.
  2. Proceedings of the Third National DAAAM Conference in Estonia : SCIENCE '98 / Tallinn Technical University. Department of Machinery. Tallinn, 1998. 121 p.
  3. Mehaanikainseneride koolitus 1918–1998 / toimetuskolleegium: J. Kübarsepp (esimees), E. Hendre (peatoimetaja) jt. ; koostajad: M. Ajaots, E. Hendre, K. Kenk, P. Kulu, J. Kübarsepp, R. Küttner, R. Levet, E. Mesila, V. Mägi, T. Pappel, J. Papstel, M. Pikner, V. Reedik, V. Rjadnev, J. Tadolder, L. Õispuu. Tallinn : TTÜ kirjastus, 1998. 215 lk.
  4. Arensburger, D., Kulu, P. (koost.). Laboratoorsete tööde juhendid metalliõpetuses. 2. Tallinn, 1998. 106 lk.
  5. Carmona Dávila, R. El camino al DIN EN ISO 9000 al QS 9000 y al VDA 6.1, como elemento clave para el éxito en la calidad. México : Editorial Diana, 1998. 148 p.
  6. Carmona Dávila, R. El hombre, principio universal de la calidad. México D.F. : Diana Editorial, 1998. 147 p.
  7. Jaanson, A. Predicting characteristics of the surface roughness. Tallinn : TTÜ, 1998. 15 p. (Preprints of Tallinn Technical University ; E5).
  8. Järvpõld, L. (tlk.). Kettülekande tehnika : teejuht rullkettülekande tehniliste seoste realistlikku käsitlusse : [prospekt] / koostaja Rexnord Kette. S.l., [1998]. 35 lk.
  9. Kiitam, A. (tlk.). Kvaliteedijuhtimine ja kvaliteedisüsteemi elemendid. Osa 3, Juhised töötlusmaterjalidele = Quality management and quality system elements. Part 3, Guidelines for processed materials. [Tallinn] : Eesti Standardiamet, 1998. 68 lk. (Eesti standard ; EVS-ISO 9004-3:1998).
  10. Kiitam, A. (tlk.). Kvaliteedijuhtimine ja kvaliteedisüsteemi elemendid. Osa 4, Juhised kvaliteediparenduseks = Quality management and quality system elements. Part 4, Guidelines for quality improvement. [Tallinn] : Eesti Standardiamet, 1998. 61 lk. (Eesti standard ; EVS-ISO 9004-4:1998).
  11. Kiitam, A. (tlk.). Kvaliteedijuhtimise ja kvaliteeditagamise standardid. Osa 4, Juhised usaldatavusprogrammi juhtimiseks = Quality management and quality assurance standards. Part 4, Guide to dependability programme management. [Tallinn] : Eesti Standardiamet, 1998. 16 lk. (Eesti standard ; EVS-ISO 9000-4:1998).
  12. Kiitam, A. (tlk.). Kvaliteedisüsteemide auditeerimise juhised. Osa 1, Auditeerimine = Guidelines for auditing quality systems. Part 1, Auditing. [Tallinn] : Eesti Standardiamet, 1997. 24 lk. (Eesti standard ; EVS-EN 30011-1:1997).
  13. Kiitam, A. (tlk.). Kvaliteedisüsteemide auditeerimise juhised. Osa 2, Kvaliteedisüsteemide audiitorite kvalifikatsioonikriteeriumid = Guidelines for auditing quality systems. Part 2, Qualification criteria for quality systems auditors. [Tallinn] : Eesti Standardiamet, 1997. 16 lk. (Eesti standard ; EVS-EN 30011-2:1997).
  14. Kiitam, A. (tlk.). Kvaliteedisüsteemide auditeerimise juhised. Osa 3, Auditiprogrammide juhtimine = Guidelines for auditing quality systems. Part 3, Management of audit programmes. [Tallinn] : Eesti Standardiamet, 1997. 11 lk. (Eesti standard ; EVS-EN 30011-3:1997).
  15. Kirs, J. Mehaanikaliste süsteemide võnkumised. Tallinn, 1998. 123 lk.
  16. Kulderknup, E., Laaneots, R., Nanits, M. (koost.). Kauba ja materjali massi mõõtmine kaalumisega : mõõtemetoodika. [Tallinn] : Eesti Standardiamet, 1998. 15 lk. (Eesti standard ; EVS 745:1998).
  17. Kulderknup, E., Laaneots, R., Nanits, M. (koost.). Tükikauba koguse mõõtmine : mõõtemetoodika. [Tallinn] : Eesti Standardiamet, 1998. 6 lk. (Eesti standard ; EVS 746:1998).
  18. Kulu, P. (koost.). Terased : Eurostandardid (liigitus, tähistus, markeering, koostis, margivastavus). Firmaterased. Alumiiniumisulamid : Eurostandardid (markeering, koostis, margivastavus). Firmasulamid. Tallinn, 1998. 129 l. (Euro) ([Insenerimaterjalid]).
  19. Kulu, P., Kübarsepp, J. (koost.). Metalliõpetus ja metallide tehnoloogia : eesti-inglise-saksa-vene terminid ja määratlused. [1. vihik], I Metallograafia ja termotöötlus, II Metallid ja sulamid. 2. tr. Tallinn, 1998. 93 lk.
  20. Kulu, P., Kübarsepp, J., Valdma, L. Metalliõpetus ja metallide tehnoloogia. 1, Metalliõpetus ja metallurgia. Tallinn, 1998. 216 lk.
  21. Küttner, R. (koost.). Eesti riiklik innovatsiooniprogramm : (toodete ja tehnoloogiate konkurentsivõime tõstmise programm). Tallinn, 1998. 56 lk.
  22. Laaneots, R. Mõõtmine. Tallinn, 1998. 135 lk.
  23. Laaneots, R., Krutob, V. jt. (koost.). Metroloogia. Terminid ja määratlused : [eesti-inglise-prantsuse-saksa-vene]. [Tallinn] : Eesti Standardiamet, 1998. 56 lk. (Eesti standard ; EVS 758:1998).
  24. Lavrentjev, J. Determination of one-port source data for fans via scaling laws and lumped models. Stockholm, 1998. 47 p. (Report of Royal Institute of Technology ; TRITA-FKT 98:27).
  25. Lavrentjev, J. Multi-port models for source characterization of fluid machines. Stockholm, 1998. Eraldi pag. (140 p.). (Doctoral thesis of Royal Institute of Technology ; TRITA-FKT 98:28). Doctoral thesis – Royal Institute of Technology, 1998.
  26. Lepikson, H. (koost.). V-kujulise neljataktilise sisepõlemismootori kinemaatilise skeemi projekteerimine. 3. tr. Tallinn, 1998. 76 lk.
  27. Lööne, R., Kiitam, A. (tlk.). ISO 9000 väikeettevõtetele : mida teha : nõuanded ISO tehniliselt komiteelt ISO/TC 176. [Tallinn] : Eesti Standardiamet, 1998. 177 lk. (EVS käsiraamat).
  28. Reedik, V., Kaps, T. Impact study 1992-1997 : Estonia. Tallinn, 1998. 32 p.
  29. Tadolder, J. Mehanika mašin : konspekt lekcij. Tallinn, 1998. 139 lk.
  30. Tammaru, T. (toim.). Ülemaailmse kvaliteedipäeva ja Euroopa kvaliteedinädala rahvusvaheline konverents Kvaliteet ühiskonna teenistuses, 13. novembril 1997. a. Tallinnas. [Tallinn], cop. 1997. 84 lk.
  31. Topnik, E. Insenerimehaanika põhivara. Tallinn, 1998. 86 lk.
  32. Üksti, L. (tlk.). SKF laagrite tehnohoolduse käsiraamat / toimetanud L.Järvpõld.. [Tallinn] : [Alas-Kuul], 1998. 335 lk.

Artiklid

  1. Abiline, I., Laaneots, R. Calibration of thread limit plug gauges // Proceedings of the Third National DAAAM Conference in Estonia : SCIENCE '98. Tallinn, 1998. p. 30-32.
  2. Ajaots, M. Masinad ja aparaadid meie keeles ja meeles // Tallinna Tehnikaülikooli aastaraamat 1997. Tallinn, 1998. lk. 163-170.
  3. Ajaots, M., Tamre, M. Micro capacitive displacement transducer // Proceedings of the 10th DAAAM International Symposium, Cluj-Napoca, Romania, Vienna, 1998, p. 005-006.
  4. Altosaar, M., Hiie, J., Mellikov, E. Selection of processing conditions for solution growth of CdTe and CuInSe2 monograin powders on the base of phase diagrams // 24th Estonian Chemistry Days : abstracts of scientific conference. Tartu, 1998. p. 11.
  5. Altosaar, M., Krustok, J., Mädasson, J., Mellikov, E., Kukk, P. Formation of photosensitivity in CdSexTe1-x monograin powders // Ternary and Multinary Compounds : proceedings of the 11th International Conference on Ternary and Multinary Compounds, ICTMC-11, University of Salford, 8-12 September 1997. London, 1998. p. 553-556. (Institute of Physics Conference Series ; 152).
  6. Arjasov, G., Strizak, V. Analiz raspredelenija nagruzki i naprjazenij v rez'bovom soedinenii na osnove MKÈ // 16th International Conference "Mathematical Modelling in Mechanics of Solids and Structures, Boundary and Finite Element Methods", June 1998, St. Peterburg, Russia, p. 59-64. Vene keeles.
  7. Arjasov, G., Strizak, V. Procnost' rez'bovyh soedinenij konstrukcij pri nizkotemperaturnyh vozdejstvijah // Aktual'nye problemy mehaniki, procnosti i teploprovodnosti pri nizkih temperaturah : tezisy dokladov IV naucno-tehniceskogo seminara. Sankt-Peterburg, 1998. lk. 59-61. Vene keeles.
  8. Eerme, M., Resch, M. Optimization of dynamic behavior of shell structures in the interesting frequency band // Proceedings : NordDesign '98 : August 26-28 1998, Royal Institute of Technology, Stockholm, Sweden. Stockholm : Royal Institute of Technology, 1998. p. 257-262. (TRITA-MMK; 1998:15).
  9. Grossschmidt, G., Vanaveski, J. Causality of mathematical models of technical systems // ESM'98 : Simulation : Past, Present and Future : 12th European Simulation Multiconference, June 16-19, 1998, Manchester, United Kingdom. [Ghent] : Society for Computer Simulation International, 1998. p. 191-195.
  10. Grossschmidt, G., Vanaveski, J. Characteristics of a hydraulic system with electro-hydraulic servo-valve controlled cylinder // 2nd International Conference on Machine Automation. Advanced Mechatronics: first-time-right, September 15-18, 1998, Tampere, Finland : proceedings of the ICMA'98. Vol. 1. S. l., [1998]. p. 311-323.
  11. Grossschmidt, G., Vanaveski, J. Composing multi-pole-model block schemes for a load-sensing hydraulic drive // Proceedings of the Estonian Academy of Sciences. Engineering. 4 (1998) 3, p. 209-224.
  12. Grossschmidt, G., Vanaveski, J. Non-symmetric four-way servo-valve parameters // Proceedings of the Third National DAAAM Conference in Estonia : SCIENCE '98. Tallinn, 1998. p. 19-22.
  13. Grossschmidt, G., Vanaveski, J., Harf, M., Züger, A. Creating the classes with NUT language for chain system simulation // Proceedings : NordDesign '98 : August 26-28, 1998, Royal Institute of Technology, Stockholm, Sweden. Stockholm : Royal Institute of Technology, 1998. p. 147-156. (TRITA-MMK ; 1998:15).
  14. Hendre, E. Leiutis, mis läks maailma Eestist : [Walter Zappi konstrueeritud minifotokaamera Minox] // Horisont (1998) 1, Horisondi Extra, lk. 10-11.
  15. Hendre, E. Vibroisolatsioon ; Vööliide ; Õhklaagerdus // Eesti entsüklopeedia. 10. Tallinn : Eesti Entsüklopeediakirjastus, 1998. lk. 373, 581, 588.
  16. Hiie, J., Altosaar, M., Mellikov, E. Comparative study of isothermal grain growth of CdS and CdTe in the presence of halide fluxes at low temperatures // Abstracts of the International Conference POLYSe'98 : Polycrystalline Semiconductors – Bulk Materials, Thin Films and Devices, 13-18 Sept. 1998, Schwäbisch Gmünd, Germany, p. O24
  17. Hiie, J., Altosaar, M., Mellikov, E. Multiple role of fluxing agent in the recrystallization process // Abstracts of the 2nd WCEPSEC, 1998, p. 732.
  18. Hiie, J., Altosaar, M., Mellikov, E., Mädasson, J., Sapogova, J., Mikli, V. Isothermal grain growth of CdTe in CdCl2 and Te fluxes // Conference record of the Twenty Sixth IEEE Photovoltaic Specialists Conference – 1997, Anaheim, CA, 29 September – 03 October 1997. S.l., cop. 1997. p. 455-458.
  19. Hindreus, T. Ettevõtte kvaliteedisüsteem ja ISO 9000 sarja standardid // Strateegia (1998) 4, lk. 18.
  20. Hjelt, K., Krustok, J., Yakushev, M., Collan, H., Hill, A.E., Tomlinson, R.D. Photoluminescense of AgInSe2 // Ternary and Multinary Compounds : proceedings of the 11th International Conference on Ternary and Multinary Compounds, ICTMC-11, University of Salford, 8-12 September 1997. London, 1998. p. 441-444. (Institute of Physics Conference Series ; 152).
  21. Ingerma, A., Strizhak, V. An analysis of the reasons of the failure of the locking devices of M/V ESTONIA // Final report on the MV ESTONIA disaster of 28 September 1994. Supplements. Pt. 2. Helsinki, 1997. Supplement No. 510, 9 p.
  22. Ingerma, A., Strizhak, V. The strength studies for the locking devices of the bow visor of M/V ESTONIA // Final report on the MV ESTONIA disaster of 28 September 1994. Supplements. Pt. 2. Helsinki, 1997. Supplement No. 507, 36 p.
  23. Kaljas, F., Reedik, V. On synergistic aspects in integrated product development of mechatronic systems // Mechatronics '98 : proceedings of the 6th UK Mechatronics Forum International Conference, Skövde, Sweden, 9-11 September 1998. Amsterdam : Pergamon, [1998]. p. 513-516.
  24. Karaulova, T., Papstel, J. STEP-implementation in manufacturing environment // Proceedings of the Third National DAAAM Conference in Estonia : SCIENCE '98. Tallinn, 1998. p. 80-84.
  25. Kenk, K. On the modeling of cyclic shear in plasticity // Aktual'nye problemy mehaniki, procnosti i teploprovodnosti pri nizkih temperaturah : tezisy dokladov IV naucno-tehniceskogo seminara. Sankt-Peterburg, 1998. lk. 61-63.
  26. Kiitam, A. Kvaliteediedenduse mõned päevaprobleemid Eestis // Ülemaailmsele kvaliteedipäevale ja Euroopa kvaliteedinädalale pühendatud rahvusvaheline konverents "Jagades kogemusi, jagame tulu" : 11.-12. novembril 1998. a. Tallinnas. [Tallinn : Eesti Kvaliteediühing, 1998]. lk. 84-89.
  27. Kiitam, A., Tammaru, T. Some considerations on the criteria of Estonian National Quality Award // Proceedings of the Third National DAAAM Conference in Estonia : SCIENCE '98. Tallinn, 1998. p. 41-44.
  28. Kirs, J. Minimum weight problem of circular plates under dynamic pressure loading, considering the hardening of material // Aktual'nye problemy mehaniki, procnosti i teploprovodnosti pri nizkih temperaturah : tezisy dokladov IV naucno-tehniceskogo seminara. Sankt-Peterburg, 1998. lk. 63-64.
  29. Kleis, I. Kiirustamine maksab // Autorevüü (1998) 4, lk. 30-31.
  30. Kleis, I., Hussainova, I., Shcheglov, I. Impact between spherical glass particles and different target surfaces // Proceedings of the Estonian Academy of Sciences. Engineering. 4 (1998) 1, p. 18-25.
  31. Kleis, I., Pappel, T., Hussainova, I., Shcheglov, I. Issledovanie processa udarnyh vzaimodejstvij castic // Trenie i iznos. 18 (1997) 6, lk. 730-735. Vene keeles.
  32. Kohutek, I., Besterci, M., Kulu, P. Moznosti hodnotenia morfólogie castic práškov obrazovou analýzou // Pokroky práškové metalurgie. 36 (1998) 1, p. 12-18. Titel's translation: Application of image analysis evaluation of powder particle morphology.
  33. Koik, M. On mutual relations of primary and secondary product development // Proceedings of the Third National DAAAM Conference in Estonia : SCIENCE '98. Tallinn, 1998. p. 57-59.
  34. Kommel, L., Teterin, G.P. Èlektrovysadka zagotovok pod štampovku korotkoper'evyh lopatok kompressora // Kuznecno-štampovocnoe proizvodstvo (1988) 10, lk. 18-22. Vene keeles.
  35. Kommel, L., Teterin, G.P., Kodess, B.N. Vlijanie teplofiziceskih svojstv titanovyh splavov na parametry èlektrovysadki // Kuznecno-štampovocnoe proizvodstvo (1988) 7, lk. 29-34. Vene keeles.
  36. Krunks, M., Bijakina, O., Mellikov, E., Varema, T. Formation of CuInS2 thin films by chemical spray pyrolysis // Ternary and Multinary Compounds : proceedings of the 11th International Conference on Ternary and Multinary Compounds, ICTMC-11, University of Salford, 8-12 September 1997. London, 1998. p. 325-328. (Institute of Physics Conference Series ; 152).
  37. Krunks, M., Bijakina, O., Mikli, V., Varema, T. Formation and recrystallization of CuInS2 films in spray pyrolytic process // 24th Estonian Chemistry Days : abstracts of scientific conference. Tartu, 1998. p. 33.
  38. Krunks, M., Bijakina, O., Mikli, V., Varema, T., Mellikov, E. Zinc oxide thin films by spray pyrolysis // 18th Nordic Semiconductor Meeting, Linköping, June 7-10, 1998 : abstracts. S. l., [1998]. p. H-106.
  39. Krunks, M., Leskelä, T., Mannonen, R., Niinistö, L. Thermal decomposition of copper(I) thiocarbamide chloride hemihydrate // Journal of thermal analysis. 53 (1998) p. 355-364.
  40. Krunks, M., Leskelä, T., Mutikainen, I., Niinistö, L. A thermoanalytical and structural study of copper(I) thiocarbamide compounds // ESTAC-7 : 7th European Symposium on Thermal Analysis and Calorimetry, Aug. 30 – Sept. 4, 1998, Balatonfüred, Hungary : book of abstracts. S. l., [1998]. p. 88.
  41. Krunks, M., Mikli, V., Bijakina, O., Varema, T., Mellikov, E. Growth and recrystallization of CuInS2 films in spray pyrolytic process // Ninth International Conference on Solid Films and Surfaces : ICSFS-9 : July 6th – 10th, 1998, Copenhagen, Denmark : final program & the book of abstracts. S. l., [1998]. p. P1.CG.13.
  42. Krustok, J. Elementaarne kui mitteelementaarne // Horisont (1998) 8, lk. 13-14.
  43. Krustok, J. Marsil oli elu, ei olnud, oli, ei olnud... // Loodus (1998) märts, lk. 36.
  44. Krustok, J. Meile vastab füüsik Jüri Krustok // Horisont (1998) 7, lk. 22-23.
  45. Krustok, J. Nanotorud // Horisont (1998) 4, Horisondi Ekstra, lk. 9-11.
  46. Krustok, J. Neutriinol on siiski mass! // Horisont (1998) 7, Horisondi Extra, lk. 12-13.
  47. Krustok, J. Teekond absoluutse nullini // Horisont (1998) 6, Horisondi Extra, lk. 9-10.
  48. Krustok, J. Tõrksa taltsutamine : kas kõiki Tallinna raadiojaamu saaks edastada ühel sagedusel? Uudne tehnoloogia võib fantaasia teoks teha // Luup (1998) 20, lk. 43.
  49. Krustok, J., Collan, H., Hjelt, K., Yakushev, M., Hill, A.E., Tomlinson, R.D., Mändar, H., Neumann, H. Photoluminescence and photoluminescence excitation study of CuGaTe2 // Journal of applied physics. 83 (1998) 12, p. 7867-7872.
  50. Krustok, J., Collan, H., Yakushev, M., Hjelt, K. The role of spatial potential fluctuations in the shape of the PL bands of multinary semiconductor compounds // 18th Nordic Semiconductor Meeting, Linköping, June 7-10, 1998 : abstracts. S. l., [1998]. p. F-84.
  51. Krustok, J., Mädasson, J., Hiie, J. Photoluminescence properties of Z-bands in CdTe // Physica status solidi. A. 165 (1998) p. 517-525.
  52. Krutob, V. Mis on akrediteerimine // Eesti Välismajanduse Teataja (1998) 10, lk. 10-13.
  53. Krutob, V. Restructuration of Estonian measurement system // Proceedings of the Third National DAAAM Conference in Estonia : SCIENCE '98. Tallinn, 1998. p. 60-62.
  54. Kruusing, A., Leppävuori, S., Uusimäki, A. Printed solenoid windings for miniature electromagnetic devices // Proceedings of the 9th Workshop on Micromachining, Micromechanics and Microsystems : MME'98, June 3-5, 1998, Ulvik, Norwey, p. 179-181.
  55. Kruusing, A., Leppävuori, S., Uusimäki, A., Uusimäki, M. Mask-defined abrasive-jet micromachining // MICRO SYSTEM Technologies 98 : 6th International Conference and Exhibition on Micro Electro, Opto, Mechanical Systems and Components, Potsdam, Germany, December 1-3, 1998, p. 673-675.
  56. Kruusing, A., Makarova, O., Uusimäki, A., Leppävuori, S. Electro-discharge machining of ceramic magnetic materials // Proceedings of the Third National DAAAM Conference in Estonia : SCIENCE '98. Tallinn, 1998. p. 114-117.
  57. Kruusing, A., Podgurski, V. Research of permanent magnet microfabrication technology and electromagnetic microdevices at Tallinn Technical University // Proceedings of the Third Micro Structure Workshop, Uppsala, March 24-25, 1998, p. 71-78.
  58. Kruusing, A., Podgurski, V., Osvet, A., Herranen, M. Diamond-like carbon coatings on NdFeB magnets // Proceedings of the Estonian Academy of Sciences. Engineering. 4 (1998) 1, p. 26-33.
  59. Kruusing, A., Tauts, A. On the voltage across an inductor with time-varying turn number // 43. Internationales Wissenschaftliches Kolloquium, 21.-24.09.1998. Band 4, Vortragsreihen : Elektroenergiesysteme und elektrische Geräte, Diagnostik, Hochspannungstechnik und elektrische Isoliertechnik, Energiewandlung. [Ilmenau] : Technische Universität Ilmenau, 1998. S. 628-633.
  60. Kruusing, A., Uusimäki, A., Leppävuori, S. Laser cutting of NdFeB // Materials Engineering - 98 : materials of the VII-th International Baltic Conference, September 24-25, Jurmala, Latvia. Riga, 1998. p. 105-108.
  61. Kulderknup, E. Kaalude võrdluskalibreerimine // EVS Teataja (1998) 3, lk. 7-12.
  62. Kulderknup, E. Katse- ja kalibreerimislaborite akrediteerimine // Eesti Välismajanduse Teataja (1998) 4, lk. 15-25.
  63. Kulderknup, E. Sertifitseerimis- ja inspekteerimisorganite akrediteerimine // Eesti Välismajanduse Teataja (1998) 3, lk. 17-23.
  64. Kulderknup, E., Laaneots, R. Estimation of uncertainty in mass measurement by weighing // Proceedings of the Third National DAAAM Conference in Estonia : SCIENCE '98. Tallinn, 1998. p. 33-36.
  65. Kulu, P. Uushõbe ; Valgevask ; Valumetall ; Valuteras ; Vasesulamid ; Vasetamine ; Vedelsulamid ; Vedruterased ; Widmannstätteni struktuur ; Volfraamimine ; Värvilised metallid ; Väärismetallid // Eesti entsüklopeedia. 10. Tallinn : Eesti Entsüklopeediakirjastus, 1998. lk. 169, 199, 240, 259, 379, 479, 566, 576.
  66. Kulu, P., Halling, J. Recycled hard metal-base wear-resistant composite coatings // Journal of thermal spray technology. 7 (1998) 2, p. 173-178.
  67. Kulu, P., Pihl, T., Halling, J. Wear-resistant WC-Co-NiCrSiB composite coatings // NORDTRIB '98 : proceedings of the 8th International Conference on Tribology, Ebeltoft, Denmark, 7-10 June 1998. Vol. 2. Aarhus : DTI Tribology Centre, 1998. p. 809-818.
  68. Kulu, P., Zimakov, S. Wear-resistant detonation sprayed WC-Co coatings // Proceedings of the Third National DAAAM Conference in Estonia : SCIENCE '98. Tallinn, 1998. p. 94-96.
  69. Kulu, P., Tümanok, A., Mikli, V., Käerdi, H., Kohutek, I., Besterci, M. Possibilities of evaluation of powder particle granulometry and morphology by image analysis // Proceedings of the Estonian Academy of Sciences. Engineering. 4 (1998) 1, p. 3-17.
  70. Kõrv, A. Something different for the enterprise management : the theory of constraints // Proceedings of the Third National DAAAM Conference in Estonia : SCIENCE '98. Tallinn, 1998. p. 77-79.
  71. Kübarsepp, J. Vaakumahi ; Vagranka ; Valu ; Valumetall ; Valuvorm ; Vanametall ; Vormimisautomaat ; Vormimismasin ; Vormkast ; Õhupuhur ; Üliplastsus // Eesti entsüklopeedia. 10. Tallinn : Eesti Entsüklopeediakirjastus, 1998. lk. 113-114, 133, 198, 199, 202, 206, 493, 591, 648.
  72. Kübarsepp, J., Annuka, H., Reshetnyak, H. Significance of structural characteristics on wear resistance of hardmetals // Proceedings of the Third National DAAAM Conference in Estonia : SCIENCE '98. Tallinn, 1998. p. 90-93.
  73. Kübarsepp, J., Pirso, J., Annuka, H. The features of wear and application of hardmetals // Mekaaniset kulumisilmiöt ja kulutusta kestävät materiaalit : proceedings of spring seminar, June 8-10, 1998, Korpilahti, Finland. S.l.: Tampere University of Technology, [1998], p. 14.1-14.5.
  74. Kübarsepp, J., Reshetnyak, H. Characterization of hardmetals wear // Materials Engineering - 98 : materials of the VII-th International Baltic Conference, September 24-25, Jurmala, Latvia. Riga, 1998. p. 123-127.
  75. Kübarsepp, J., Reshetnyak, H., Pirso, J., Annuka, H. Features of wear of TiC-base hardmetals // Proceedings of the World Congress and Exhibition on Powder Metallurgy, October 18-22, Granada, Spain. London : EPMA, 1998. p. 75-79.
  76. Küttner, R. [Info- ja kommunikatsioonitehnoloogiast] // A & A (1998) 4, lk. 3-4.
  77. Laansoo, A. Eesti Keevitusühing // 10 aastat Eesti Inseneride Liitu : 1988-1998. [Tallinn] : Eesti Inseneride Liit, [1998]. lk. 24.
  78. Laansoo, A., Stepanov, A., Päärsoo, R. Modern welding technology and quality assurance in Estonian industry // Proceedings of the Third National DAAAM Conference in Estonia : SCIENCE '98. Tallinn, 1998. p. 97-98.
  79. Lavrentjev, J. Prediction of 1-port source data for centrifugal fans // Proceedings of International Conference INTER-Noise 98, Christchurch, New Zealand, 1998, p. 310-313.
  80. Lille, H., Kõo, J., Kulu, P., Pihl, T. On the residual stresses in melted Ni-based powder coatings // Proceedings of the Third National DAAAM Conference in Estonia : SCIENCE '98. Tallinn, 1998. p. 110-113.
  81. Mellikov, E. Materials science education in Estonia // Abstracts of MRS Fall Meeting, Boston, 1997, p. 756.
  82. Mellikov, E. Pooljuhtmaterjalid päikeseenergeetikale ja optoelektroonikale : kommentaar Eesti Vabariigi teaduse aastapreemia pälvinud tööle // Tallinna Tehnikaülikooli aastaraamat 1997. Tallinn, 1998. 116-119.
  83. Mellikov, E. The use and research in renewables in Estonia // Abstracts of the Conference "Renewable Energy Technologies in Cold Climates '98", Montreal, Canada, p. 14.
  84. Mellikov, E. The use and research of renewables in Estonia // Renewable Energy Technologies in Cold Climates '98 : an International Conference : incorporating the 24th Annual Conference of the Solar Energy Society of Canada Inc. (SESCI), 4-6 May 1998, Montréal, Québec, Canada : proceedings. S. l., [1998]. p. 211-215.
  85. Mellikov, E. Thin film solar cells : fundamental studies for improved materials and devices // Renewable Energies Technologies and Strategies in Central and Eastern European Countries, Sophia Antipolis (FR), 19-21 October 1998 : abstracts. S. l., [1998]. p. 47.
  86. Mellikov, E., Altosaar, M., Krunks, M., Krustok, J., Valdna, V. Teaduspreemia tehnikateaduste alal töö "Pooljuhtmaterjalid päikeseenergeetikale ja optoelektroonikale" eest // Eesti Vabariigi teaduspreemiad 1998. Tallinn, 1998. lk. 32-39.
  87. Mellikov, E., Kulu, P. Eesti Materjalitehnika Ühing // 10 aastat Eesti Inseneride Liitu : 1988-1998. [Tallinn] : Eesti Inseneride Liit, [1998]. lk. 26-28.
  88. Mesila, R., Riives, J. Fastering of product development process // Proceedings of the Third National DAAAM Conference in Estonia : SCIENCE '98. Tallinn, 1998. p. 73-76.
  89. Moor, K. Robotic modular system for production automation of electronic industry // Proceedings of the Third National DAAAM Conference in Estonia : SCIENCE '98. Tallinn, 1998. p. 66-69.
  90. Nirk, T. Mobility and traffic congestion in nowadays Estonia // 1998 FISITA World Automotive Congress, Paris, Sept. 27 – Oct. 1 '98 : proceedings : [CD-ROM]. Paris : Society of Automotive Engineers, [1998]. [7] p.
  91. Papstel, J. Artificial intelligence in the environment of manufacturing // Proceedings of the Estonian Academy of Sciences. Engineering. 4 (1998) 3, p. 178-188.
  92. Papstel, J. Industry in the developing world // Proceedings of the Third National DAAAM Conference in Estonia : SCIENCE '98. Tallinn, 1998. p. 70-72.
  93. Papstel, J. Mehaanikainseneride Liit // 10 aastat Eesti Inseneride Liitu : 1988-1998. [Tallinn] : Eesti Inseneride Liit, [1998]. lk. 25-26.
  94. Papstel, J., Karaulova, T., Saks, A. Problems of manufacturing environment modelling in intelligent manufacturing systems // Manufacturing simulation for industrial use : IX Workshop on Supervising and Diagnostics of Machining Systems, Karpacz, Poland, March 22-27, 1998. Wroclaw : Oficyna Wydawnicza Politechniki Wroclawskiej, 1998. p. 14-21.
  95. Papstel, J., Reedik, V., Saat, M. Industrial engineering and management education in the framework of BALTECH collaboration // 2nd Baltic Region Seminar on Engineering Education, Riga Technical University, Riga, Latvia, 26-28 September 1998 : seminar proceedings. Melbourne: Monash University, cop. 1998. (Monash engineering education series). p. 69-71.
  96. Papstel, J., Saks, A. Agent-based approach to manufacturing planning // Annals of DAAAM for 1998 & proceedings of the 9th International DAAAM Symposium. Vienna : DAAAM International, 1998. p. 369-370.
  97. Petretis, Br., Balciuniene, M., Kruusing, A. The investigation of the structure of NdFeB surface, acted by laser irradiation // Materials Engineering - 98 : materials of the VII-th International Baltic Conference, September 24-25, Jurmala, Latvia. Riga, 1998. p. 109-112.
  98. Pihl, T., Kulu, P. Influence of the technology to the properties of gas-flame coatings // Proceedings of the Third National DAAAM Conference in Estonia : SCIENCE '98. Tallinn, 1998. p. 118-121.
  99. Pirso, J., Kübarsepp, J., Letunovits, S. Abrasive erosion of titanium carbide-base cermets // NORDTRIB '98 : proceedings of the 8th International Conference on Tribology, Ebeltoft, Denmark, 7-10 June 1998. Vol. 1. Aarhus : DTI Tribology Centre, 1998. p. 231-237.
  100. Podgurski, V., Kruusing, A. Investigation of surface morphology of Nd2Fe14B and Nd2Fe14B+DLC thin films // Proceedings of the Third National DAAAM Conference in Estonia : SCIENCE '98. Tallinn, 1998. p. 107-109.
  101. Põdra, P., Kannelmäe, Ü. Product development – two conceptual approaches in Estonia today // Proceedings of the Third National DAAAM Conference in Estonia : SCIENCE '98. Tallinn, 1998. p. 53-56.
  102. Rahula, A. Automatic process controll in dairy // Proceedings of the Third National DAAAM Conference in Estonia : SCIENCE '98. Tallinn, 1998. p. 87-89.
  103. Reedik, V. 30 years of aerodynamic research at Faculty of Mechanical Engineering // Proceedings of the Third National DAAAM Conference in Estonia : SCIENCE '98. Tallinn, 1998. p. 37-40.
  104. Reedik, V. On assurance of product development education efficiency in the countries of transition economy // Proceedings of the 4th International Conference on Product Development in Engineering Education, Cologne, Germany, December 10-12, 1998, p. 243-248.
  105. Reedik, V. Product development in traditional university as impact on its innovation // Proceedings : NordDesign '98 : August 26-28, 1998, Royal Institute of Technology, Stockholm, Sweden. Stockholm : Royal Institute of Technology, 1998. p. 39-44. (TRITA-MMK ; 1998:15).
  106. Reshetnyak, H., Kübarsepp, J. Features of hardmetals wear resistance // NORDTRIB '98 : proceedings of the 8th International Conference on Tribology, Ebeltoft, Denmark, 7-10 June 1998. Vol. 1. Aarhus : DTI Tribology Centre, 1998. p. 239-246.
  107. Reshetnyak, H., Kübarsepp, J. Reliability characteristics of hardmetals // Proceedings of the World Congress and Exhibition on Powder Metallurgy, October 18-22, Granada, Spain. London : EPMA, 1998. p. 15-20.
  108. Reshetnyak, H., Kübarsepp, J. Resistance of hardmetals to fracture // Powder metallurgy. 41 (1998) 3, p. 211-216.
  109. Roosimölder, L. Limited slip differential gear // Proceedings : NordDesign '98 : August 26-28, 1998, Royal Institute of Technology, Stockholm, Sweden. Stockholm : Royal Institute of Technology, 1998. p. 263-267. (TRITA-MMK ; 1998:15).
  110. Rudenja, S., Kulu, P., Talimets, E., Mikli, V., Straede, C.A. Corrosion performance of duplex TiN coatings deposited by arc plating // Surface & coatings technology. 100/101 (1998) p. 247-250.
  111. Rudenja, S., Kulu, P., Talimets, E., Mikli, V., Straede, C.A., Zwieg, T. Electrochemical evaluation of TiN coatings // Proceedings of the Symposium on Interconnect and Contact Metallization : August 31 – September 5, Paris. Electrochemical Society proceedings. Vol. 97-31. Pennington : Electrochemical Society, cop. 1998. p. 108-119.
  112. Strizhak, V., Meng, V. Increase of fatigue strength of threaded joints // Fatigue Design 1998, Espoo, Finland, 26-29 May, 1998. Vol. 2. Espoo : VTT, 1998. p. 625-636. (VTT Symposium ; 182).
  113. Strizhak, V., Penkov, I. Strength investigation of rolled threads // Proceedings of International Symposium on Advances in Hardness Measurement : HARDMEKO'98. S. l. : Standard Press of China, 1998. p. 35-40.
  114. Strizak, V., Ingerma, A. Analiz nadeznosti svarnyh švov, rabotajušcih pri peremennyh i udarnyh nagruzkah : (na primere passazirskogo paroma ESTONIA) // 16th International Conference "Mathematical Modelling in Mechanics of Solids and Structures, Boundary and Finite Element Methods", June 1998, St. Peterburg, Russia, p. 51-54.Vene keeles.
  115. Zestjakova, L., Kannelmäe, Ü. Quality management – practical approach // Proceedings of the Third National DAAAM Conference in Estonia : SCIENCE '98. Tallinn, 1998. p. 49-52.
  116. Tammaru, T. Euroopa Kvaliteediharta (The European Quality Charter) // Eesti Kvaliteediühingu Infoleht (1998) 3, lk. 4.
  117. Tammaru, T. Eesti Kvaliteediühingu tegevusest // Ülemaailmse kvaliteedipäeva ja Euroopa kvaliteedinädala rahvusvaheline konverents : kvaliteet ühiskonna teenistuses, 13. novembril 1997. a. Tallinnas. [Tallinn], cop. 1997. lk. 79-84.
  118. Tammaru, T. EOQ 95 Üldsusassamblee // Eesti Kvaliteediühingu Infoleht (1998) 3, lk. 4.
  119. Tammaru, T. Performance measurement in quality systems // Proceedings of the Third National DAAAM Conference in Estonia : SCIENCE '98. Tallinn, 1998. p. 45-48.
  120. Teterin, G.P., Kommel, L. Èlektrovysadka titanovyh zagotovok s reglamentiruemymi strukturoj i svojstvami // Kuznecno-štampovocnoe proizvodstvo (1988) 8, lk. 35-40. Vene keeles.
  121. Tähemaa, T., Reedik, V. Reliability criteria continuously developing mechatronic systems // 2nd International Conference on Machine Automation. Advanced Mechatronics: first-time-right, September 15-18, 1998, Tampere, Finland : proceedings of the ICMA'98. Vol. 2. S. l., [1998]. p. 831-837.
  122. Tümanok, A., Kulu, P. Metal powders produced by disintegrator milling // Materials Engineering - 98 : materials of the VII-th International Baltic Conference, September 24-25, Jurmala, Latvia. Riga, 1998. p. 3-8.
  123. Tümanok, A., Tamm, B., Goljandin, D. Recycling of outworn tyres by grinding at normal temperature // Proceedings of the International Conference "Intelligent Assembly and Disassembly" : IAD98, Slovenia, Bled, May 21-23, 1998, p. 167-172.
  124. Tymanok, A., Kulu, P., Goljandin, D. Utilization of used tyres by grinding at normal temperature // Proceedings of the Third National DAAAM Conference in Estonia : SCIENCE '98. Tallinn, 1998. p. 99-102.
  125. Tymanok, A., Kulu, P., Goljandin, D. Utilization of used tyres by grinding at normal temperature // Materials Engineering - 98 : materials of the VII-th International Baltic Conference, September 24-25, Jurmala, Latvia. Riga, 1998. p. 150-155.
  126. Valdna, V. p-type doping of CdTe // Abstracts of the International Conference POLYSe'98 : Polycrystalline Semiconductors – Bulk Materials, Thin Films and Devices, 13-18 Sept. 1998, Schwäbisch Gmünd, Germany, p. P27.
  127. Varbola, E., Reedik, V. On enchance the response of multiple-link security system // Proceedings of the Third National DAAAM Conference in Estonia : SCIENCE '98. Tallinn, 1998. p. 63-65.
  128. Üksti, L. Üksti, Anton // Eesti kooli biograafiline leksikon. Tallinn : Eesti Entsüklopeediakirjastus, 1998. lk. 283.

• esileht
• lihtotsing
aastate lõikes:
1995 - 1996 - 1997 - 1998 - 1999 - 2000 - 2001 - 2002 - 2003 - 2004 - 2005 - 2006 - 2007
teaduskondade järgi:
• ehitusteaduskond
1995 - 1996 - 1997 - 1998
• energeetikateaduskond
1995 - 1996 - 1997 - 1998
• humanitaarteaduskond
1995 - 1996 - 1997 - 1998
• infotehnika teaduskond
1995 - 1996 - 1997 - 1998
• keemiateaduskond
1995 - 1996 - 1997 - 1998
• majandusteaduskond
1995 - 1996 - 1997 - 1998
• matemaatika-füüsika teaduskond
1995 - 1996 - 1997 - 1998
• mehaanikateaduskond
1995 - 1996 - 1997 - 1998
• süsteemitehnika teaduskond
1995 - 1996 - 1997 - 1998
• muud allasutused, üleülikoolilised väljaanded
1995 - 1996 - 1997 - 1998 











   


















PÄISTETA  







[ESILEHT]-[LIHTOTSING]-[ÜLDINFO]-[STRUKTUUR]-[TEENINDUS]-[KASUTAJAKOOLITUS]-[LINKE]-[ANDMEBAASID]-[RAAMATUD]

[PERIOODIKA]-[TTÜ PUBLIKATSIOONID]-[TTÜR VÄLJAANDED]-[NÄITUSED]-[UUDISED]